Running Cumulocity IoT DataHub on Cumulocity IoT Edge

Cumulocity IoT DataHub Edge overview

Documentation overview

The following sections will walk you through all the functionalities of Cumulocity IoT DataHub Edge in detail.

For your convenience, here is an overview of the contents:

Cumulocity IoT DataHub Edge at a glance

Cumulocity IoT Edge is an onsite, single-server, and single-tenant variant of the Cumulocity IoT Core platform. It is delivered as a software appliance designed to run on industrial PCs or local servers. Cumulocity IoT DataHub is available as an add-on to Cumulocity IoT Edge.

Cumulocity IoT DataHub Edge offers the same functionality as the cloud-variant of Cumulocity IoT DataHub, but stores the data locally. You can define offloading pipelines, which regularly move data from the Operational Store of Cumulocity IoT into a data lake. In the Edge setup, a NAS is used as data lake. Dremio, the internal engine of Cumulocity IoT DataHub, can access the data lake and run analytical queries against its contents, using SQL as the query interface.

Cumulocity IoT DataHub Edge consists of the following building blocks:

• The Cumulocity IoT DataHub UI is deployed as a web application in the Cumulocity IoT core. It provides the frontend for defining and managing offloading pipelines.
• The Cumulocity IoT DataHub backend manages offloading pipelines and their scheduled execution. The backend and its associated database run within one Docker container in the Docker daemon. Its internal state, for example, the defined offloading configurations, is persisted on the central data disk.
• The query processing is based on a Dremio master and a Dremio executor as well as on a ZooKeeper instance. Dremio master and ZooKeeper run in one Docker container and the Dremio executor runs in another one. Both containers are run by the Docker daemon. The internal state of the containers, for example, the query job history, is persisted on the central data disk. In the above figure just Dremio is shown for reasons of simplicity.
• The data lake is located on the central data disk.

Cumulocity IoT DataHub Edge versus Cumulocity IoT DataHub cloud deployments

Cumulocity IoT DataHub Edge uses the same software as Cumulocity IoT DataHub, though in the following aspects these two variants differ:

Setting up Cumulocity IoT DataHub Edge

Prerequisites

Before setting up Cumulocity IoT DataHub Edge, you must check the following prerequisites:

Hardware requirements

The hardware requirements for running a bare Cumulocity IoT Edge instance are described in section Requirements. When Cumulocity IoT DataHub Edge is additionally running, the hardware requirements of the virtual machine are as follows:

• 100 GB of free disk space plus sufficient free disk space for the data lake contents
• Intel x86 CPU
• Recommended: 12 GB RAM, minimum: 8 GB RAM
• Recommended: 4 logical CPU cores, minimum: 2 logical CPU cores
• One NIC

Hardware requirements for the host OS are excluded.

Setting up Cumulocity IoT DataHub Edge

Copy the Cumulocity IoT DataHub Edge archive to the Cumulocity IoT Edge.

scp datahub-edge.tar admin@<edge_ip_address>:/tmp

Log in as admin into Cumulocity IoT Edge.

ssh admin@<edge_ip_address>

Run the install script.

sudo /opt/c8y/utilities/install_signed_package.sh /tmp/datahub-edge.tar

During script execution, you are prompted for the username and password of the administration user of the tenant edge. During installation, you are also prompted to set the new password of the Dremio admin account. It takes a few minutes to complete the installation. After completion you can delete the Cumulocity IoT DataHub Edge archive.

The install script runs the following basic steps:

• Deploy the Cumulocity IoT DataHub Edge UI as a web application to Cumulocity IoT Core
• Start a Docker container with the Cumulocity IoT DataHub Edge backend and the database system for managing the backend state
• Start a Docker container with the Dremio master and a ZooKeeper instance
• Start a Docker container with the Dremio executor
• Configure corresponding roles and permissions in Cumulocity IoT Core

The Docker containers will be restarted automatically if the container itself fails or the applications within are no longer reachable.

The containers are configured to store their application state on the data disk under /opt/mongodb:

• /cdh-master/data: the state of the Dremio master
• /cdh-executor/data: the state of the Dremio executor
• /cdh-console/db: the state of the Cumulocity IoT DataHub Edge backend
• /cdh-master/datalake: the data lake folder

Upgrading Cumulocity IoT DataHub Edge

An upgrade of Cumulocity IoT DataHub Edge follows the same steps as the initial setup. First, you must copy the archive with the new version to Cumulocity IoT Edge. Next, you must log in as admin. Then you must run the install script using the new version.

sudo /opt/c8y/utilities/install_signed_package.sh /tmp/datahub-<NEW version>.tar

During script execution, the already installed version is detected and the script runs an upgrade using the new version. It takes a few minutes to complete the installation. After completion you can delete the Cumulocity IoT DataHub Edge archive.

Adapting to network changes of Cumulocity IoT Edge

There might be cases where you must change the network setup of your Edge installation, for example by setting the IP range used by Edge internally or changing the domain name. The network configuration of Cumulocity IoT DataHub Edge must be adapted to such a change by running the script /opt/softwareag/cdh/bin/restart.sh once. The script restarts Cumulocity IoT DataHub with parameters aligned with the new network configuration.

Accessing Cumulocity IoT DataHub Edge

The different Cumulocity IoT DataHub Edge interfaces can be accessed in the same way as in a cloud deployment of Cumulocity IoT DataHub.

Defining Cumulocity IoT DataHub permissions and roles

The definition and assignment of permissions and roles is done in the same way as in a cloud deployment. See the section Setting up Cumulocity IoT DataHub > Defining Cumulocity IoT DataHub permissions and roles for details.

Setting up Dremio account and data lake

The setup of the Dremio account and the data lake is done in the same way as in a cloud deployment. See the section Setting up Dremio account and data lake for details.

Cumulocity IoT DataHub Edge is configured to use a NAS as data lake. When configuring the NAS use as mount path /datalake. This path is mounted to /opt/mongodb/cdh-master/datalake.

Changing Dremio memory configuration on Cumulocity IoT DataHub Edge

Depending on the use case, it might be necessary to increase the memory available to Dremio, the internal engine of Cumulocity IoT DataHub. By default, Dremio is configured to consume a maximum of 4 GB of RAM (2 GB assigned to both master node and executor node).

Depending on the situation, one either needs to increase the memory of Dremio’s master or executor node. In many cases, the master node’s memory is the limiting factor, but not always. Inspecting the Query Profile in Dremio helps to determine where the bottleneck occurs.

Master node memory configuration

Run the following steps:

• Log into edge via SSH
• As root, run vi /etc/cdh/cdh-master/dremio-env and change DREMIO_MAX_HEAP_MEMORY_SIZE_MB=1750 and DREMIO_MAX_DIRECT_MEMORY_SIZE_MB=250 to your needs. For example, you can double both values.
• Run service cdh-master restart.

Executor node memory configuration

Run the following steps:

• Log into edge via SSH
• As root, run vi /etc/cdh/cdh-executor/dremio-env and change DREMIO_MAX_HEAP_MEMORY_SIZE_MB=1024 and DREMIO_MAX_DIRECT_MEMORY_SIZE_MB=1488 to your needs. For example, you can double both values.
• Run service cdh-executor restart.

Working with Cumulocity IoT DataHub Edge

Cumulocity IoT DataHub Edge offers the same set of functionality as the cloud variant. See the section Working with Cumulocity IoT DataHub for details on configuring and monitoring offloading jobs, querying offloaded Cumulocity IoT data, and refining offloaded Cumulocity IoT data.

Operating Cumulocity IoT DataHub Edge

Similar to the cloud variant, Cumulocity IoT DataHub Edge UI allows you to check system information and view audit logs. See the section on Operating Cumulocity IoT DataHub for details.

When managing Cumulocity IoT DataHub Edge, the following standard tasks are additionally relevant.

Troubleshooting the system

If problems occur, you should follow these steps:

• Perform a health check, see the section on Health check
• Check the log files, see the section on Log files
• Monitor the system processes, see the section on Monitoring

If you still need to contact product support, include the output of the diagnostics script. See the section on Diagnostics for details of how to run it.

Health check

Check Cumulocity IoT DataHub Edge backend status

You can check the status of the backend in the Administration page of the Cumulocity IoT DataHub UI. Alternatively you can query the isalive endpoint, which should produce an output similar to:

curl --user admin:your_password https://edge_domain_name/service/datahub/isalive

{
  "timestamp" : 1582204706844,
  "version" : {
    "versionId" : "10.6.0.0.337",
    "build" : "202002200050",
    "scmRevision" : "4ddbb70bf96eb82a2f6c5e3f32c20ff206907f43"
  }
}

If the backend cannot be reached, you will get an error response.

Check Dremio backend status

You can check the status of Dremio using the server_status endpoint:

curl http://datahub.edge_domain_name/apiv2/server_status
"OK"

Dremio is running if OK is returned. No response will be returned if it is not running or inaccessible.

Log files

The installation log file is stored at /var/log/cdh.

In order to access the logs of the Cumulocity IoT DataHub and Dremio containers, you must use the Docker logs command. To follow the logs of cdh-master you must run:

docker logs -f cdh-master

To follow the logs of cdh-executor you must run:

docker logs -f cdh-executor

The containers are configured to rotate log files with rotation settings of two days and a maximum file size of 10 MB.

Monitoring

Cumulocity IoT Edge uses Monit for management and monitoring of relevant processes. See the section on Monitoring for details. The Cumulocity IoT DataHub Edge processes, namely the Cumulocity IoT DataHub backend and the Dremio nodes, are also monitored by Monit.

Data disk management and monitoring

The data disk is used for storing the state of Cumulocity IoT DataHub and Dremio and serves as data lake. In order to ensure that the system can work properly, the disk must not run out of space. The main factors for the disk space allocation of Cumulocity IoT DataHub Edge are the Dremio job profiles and the data lake contents.

Cleanup of Dremio job history

Dremio maintains a history of job details and profiles, which can be inspected in Dremio’s job log, that is, the “Jobs” page of the Dremio UI. This job history must be cleaned up regularly to free the resources necessary for storing it.

Dremio is configured to perform the cleanup of job results automatically without downtime. The default value for the maximum age of stored job results is seven days. To change that value, a Dremio administrator must modify the support key jobs.max.age_in_days. The changes become effective within 24 hours or after restarting Dremio. See the corresponding Dremio documentation for more details on support keys.

Cleanup of data lake contents

The data lake contents are not automatically purged, as the main purpose of Cumulocity IoT DataHub is to maintain a history of data. However, if disk space is critical and cannot be freed otherwise, parts of the data lake contents must be deleted.

Browse to the data lake folder /opt/mongodb/cdh-master/datalake. The data within the data lake is organized hierarchically. Delete the temporal folders you deem adequate to be deleted. After that you must run the following query in Dremio:

ALTER PDS <deleted_folder_path> REFRESH METADATA FORCE UPDATE

Backup and Restore

Cumulocity IoT DataHub’s runtime state as well as the data lake containing offloaded data reside in the Cumulocity IoT Edge server VM. In order to back up and restore Cumulocity IoT DataHub, its runtime state, and its data we recommend you to back up and recover the Cumulocity IoT Edge server VM as described in section Backup and restore.