Overview
» get the Agent » PSsystec Downloads
Smartbox, based on the Telit Chipset HE910 is a ready to use solution for connecting Modbus devices to the Cumulocity Fieldbus Cloud. It provides a Master Slave Communication on RS485 for connecting up to 10 devices as well as 10 Sensors (Current ,Temperature, Pressure). Easy configure the SetUp of building automation fielddevices like pumps, e-meters, Airhandling units in the Cumulocity Fieldbus cloud or connect different sensortypes to the box. Using the MQTT protocol the terminal comes up with a low traffic solution for decentralized applications.
Datasheet
- Radio
- Connectivity/ Features
- Cloud Connector
- Edge Processing (Agent > 2.4.x)
- General
Radio
Radio | |
---|---|
4G LTE |
|
3G |
|
2G | GSM | GPRS |
Regions | EMEA / APAC / Latinamerica / NorthAmerica / Australia / Global (3G / 2G) |
GPS | Supported by 2G and 3G Variances |
Production | The selected Region,Technology and GPS can be defined during Production. The default assembly is 3G with supported regions EMEA / APAC |
Connectivity/ Features
Connectivity/ Features | ||||
---|---|---|---|---|
Layout | ||||
Fieldbus Modbus | Type | Modbus RTU Master | ||
Baudrate | 4800, 9600, 19200, 38400, 57600, 115200 | |||
Parity | Even, ODD, NONE | |||
Stoppbits | 2,1 | |||
Functioncodes | ||||
Datapoints | Max. 10 Modbus Slaves, with 100 datapoints per device or 1000 datapoints with 1 device | |||
Sensors | 12 Universal Inputs | |||
U1/U2 | DIN NO [voltage free] / DIN NC [voltage free] /0..20mA/4..20mA/0..10V/2..10V/0..5V | |||
U3/U4/U5/U6 | DIN NO [voltage free] / DIN NC [voltage free] /0..20mA/4..20mA | |||
U7/U8/U9/U10 | PT1000 | |||
Output | 24VDC Digital Output. Note: Either the Output or the 2nd Fieldbusinterface can be selected during production | |||
DIN/O | DIN [voltage free] | |||
AIN/O | NTC (selectable by Hardwarejumper, either NTC or 0..20mA) | |||
AIN/P+ | 0..20mA (selectable by Hardwarejumper, either NTC or 0..20mA) | |||
2nd Fieldbus | RS485 | Customized Interface for Modbus RTU Master/Slave,, Custom Interface. 24VDC Digital Output. Note: Either the Output or the 2nd Fieldbusinterface can be selected during production | ||
LEDs | GSM | Flashing- connected to mobile network | ||
RUN | 2xflashing/pause: StartUp Phase 3xflashing/pause: Connected to Server, Data exchange | |||
Act | Flashing: Sensor Board Power | |||
Link | Flashing: Sensor Board is ready to process data | |||
USB | For programming, Logging and Trace the device |
Cloud Connector
Cloud Connector | ||||
---|---|---|---|---|
Availability | All Cumulocity Based systems, Cloud der Dinge Deutsche Telekom | |||
Realtime Clock | Updating Realtime automatical from #NTP timeserver | |||
Application | CloudFieldbus (CFB Integrated in Devicemanagement)For SetUp connected field devices | |||
Online Operations | Remote Restart Fieldbus Configuration Cloud-Device Change Transmitinterval from device to Cloud Change Communication. Baudrate, Databits, Parity, Stopbits Operate the connected Field device: Registervalues (R/W) Operate the connected Field device: Change CoilValues (R/W) Operate the device with AT Commands in the shell | |||
Communication | MQTT | |||
Security | TLS-Security 1.0 / TLS 1.2 (ab Version 2.4.x) | |||
Notifications | Realtime and Pending Operations | |||
Shell | Operate the device with AT Commands in the shell | |||
Location | Identification by cellular network or GPS Signal (selected- see Radio) | |||
Tracking | Location Route by cellular network or GPS Signal | |||
Info | Operator, Cell ID, LAC, MNC, MCC, Signal strength | |||
Device Database | Device database Support: Measurements, Event, Alarms, Values, Read,Read/Write, Signed/Unsigned, Decimal Places, Multiplier, Divisor, No of Bits, StartBit | |||
OTA | RemoteUpdate Software | |||
Data-Exchange | Values | On Change | ||
Alarms | On Change | |||
Events | On Change | |||
Measurements | Default 900 | |||
Signal strength | Is sent every 20 Min as a measurement | |||
Offline Buffering | Alarms, Events, Measurments ≈ 72h | |||
SMS | For Troubleshooting you can operate the device by SMS:RebootChange tenantFOTA/OTA |
Edge Processing
Edge Processing | |
---|---|
FUP Plan | Supporting, 3 x PID Control, And, XOR, NOR, NAND, Multiplexer, Conversion, up to 500 Signals |
Deploy Remote | Deploy remotely by Cloud (SW Download) |
General
General | |
---|---|
Dimensions | 70 x 70 x 45 mm |
Weight | 89g |
GSM Antenna | SMA Connector |
Power Supply | Nominal voltage range: 12-24 VDC, 10% Maximum continuous (average) supply power: 2.5 W Maximum continuous (average) supply current: 200 mA at 12V, 100 mA at 24V |
Mounting | Via DIN Rail Adapter or Adapter for Wall Mounting |
SIM Card Format | 2FF |
Operating temperature | -20..60°C |
Storage temperature | -40..85°C |
Operating humidity | Max. 85% |
Storage humidity | Max. 85% |
IP Class | IP20/IP54 (opt.) |
Approvals | |
Conformity Declerations | 2014/53/EU (Radio Equipment Directive - RED)RadioEN301511 v12.5.1 for GSM 900 and 1800 MHzEN301908 v11.1.1 for UMTS band 1 and 8EMCEN 301489-1 v2.1.1 general partEN 301489-52 v0.0.7 for GSM and UMTSSafetyEN60950-01 |